You’ll need: 1 large mug (around 2-3cm in diameter) 3-5mm (1-2.5mm) black plastic cap 1 glass cup (around 1.5-2cm in length) 1 plastic straw 1 small plastic container (1cm or less) A coffee filter (optional) The steps: Cut out the mug from the plastic and place it in the plastic container.
Cover the top with the plastic straw, then put the straw over the top and secure the top to the plastic with the lid.
If you’re making the mug for a coffee bar, cover it with plastic and leave it in there.
Set the mug on a plate and place the straw in the lid, making sure it is covered.
You’ll want to leave the straw open for a few seconds while you fill the mug up.
Use a small plastic straw to scoop up some of the coffee.
Fill the mug with water and place in the fridge.
Use another small plastic mug to scoop the coffee out and add it to the mug.
You should be left with a mug with coffee in it.
You can also use a large plastic container to hold the mug and make coffee.
Place the mug back in the freezer for about 5 minutes, then pop it into the fridge for a couple of hours.
Use it for coffee, tea, water or anything else you want it to be.
If your mug gets too big, simply wrap it in plastic and you’re done.
You could also try using a straw and using a coffee filter, but be careful, as you might get a little bit of water in there!